Solar Venti

You are here: Home » Links » Featured » SV30AX


SV30AX
View Full-Size Image


SV30AX

( Manufacturer )
Enquire


A SV30AX air collector usually cover at least 250m2

SV30AX comes with complete accessories and installation kits ready for wall or roof.

The heats about 150 m3 of air per hour from 20 to 40 degrees Co. - depending on the sunlight. And blowing the heated air into the building.SV30AX differs from model SV30A by having placed the power-producing solar cell in a separate panel.

SV30AX model is most relevant in countries with extreme summer temperatures.

SV30AX model comes with an enhanced controller unit.

The newly developed circuit in the controller may include control SV30AX panel supply by means of separate humidity and temperature sensors.

SV30AX model can hereby be adjusted during installation buildings and building structures with special needs.SolarVenti recommend that SV30AX model fitted with at least 30 degrees. The panel can be further reduced in an even lower angle - but it will mean a degraded performance when the sun is low in the winter.

There are two SV30AX mounting versions:

1) with complete mounting kit for asbestos cement, tile or concrete tile coating.
2) with complete mounting kit to take with steel & flat bitumen.The panel filter is maintenance-free. For more information:Dimension SV model: 3460 x 1020 x 75 mm
Boxed SV model : 3020 x 1020 x 90 mm
Boxed solar module: 700 x 1100 x 155 mm
Boxed of SV30 Roof kit: 1070 x 260 x 170 mm
Weight SV panel Packaging: 25.5 kg
Weight SV panel with packaging 27.7 kg
Weight solar cell module with packaging: 13 kg
Weight wall set (ventilator etc.) packaged: 3.1 kg
Frame: Aluminium Colour: Aluminium, white or black (Special order)
(Additional charge for white and black)
Cover: UV-resistant Lexan (insulating)
Absorber: Special felt (black)
Air outlet: ø125
Rear: Perforated aluminium plateSolar element:
Dimension: 1. 460 x 2020 x 75 mm
Voltage: 12 Volt
Power: 38 WattFan:
Manufacturer: SUNON
Consumption: 6.2 to 6.8 W
Dimension: 120 x 120 x 38 mm
Rated output (mounted in the open air): 250 m3/hour
Actual performance (mounted in panel): 90 to 200 m3/hourRegulator:
Type: SV regulator unit (Reg II) h solar operation - with switch, regulator,
pump control and thermostat
Material: Anodized Aluminum / Black PlasticOther information:
Efficiency: Approximately 70%
Temp. increase: Typically 30-40 degrees
Even higher temperatures increase by use of small quantities of air
Room capacity: In normal use at least 250 m2
Air flow is regulated at SV regulator or nozzle